oCamViewer_User Manual(E)

oCamViewer User Manual
www.withrobot.com Page 4
2. HOW TO USE
To View Camera Image on Windows
Before starting the oCamViewer, it is necessary to connect the oCam camera to a PC.
Once started, a main window will pop-up as shown below. If the oCam camera is connected
correctly, the camera model name, serial number, connection type (USB2 or USB3) and camera
firmware version number will be shown on the main window.
Figure 1. oCamViewer Main Window – oCam-1MGN-U is connected.
Figure 2. oCamViewer Main Window – oCam-2WRS-U is connected.
On clicking the [Play] button on the main window with an oCam camera is connected, the
camera is activated, and the camera image is shown on the display window.