oCamViewer_User Manual(E)

oCamViewer User Manual
www.withrobot.com Page 14
APPENDIX
How To Check Camera Connection
On Windows, the connection of an oCam camera can be checked on the Device Manager.
When connected normally, an oCam camera will be displayed under the “Camera” category.
Figure 16. oCam camera connection check on Windows Device Manager
On Linux, the connection of an oCam camera can be checked using the “lsusb” command.
$ lsusb
Bus 004 Device 026: ID 04b4:00f9 Cypress Semiconductor Corp.