User Manual
Table Of Contents
- Minimum requirements
- BPM Connect description
- Setting up BPM Connect
- Using BPM Connect
- Understanding my blood pressure measurements
- Managing my data
- Dissociating BPM Connect
- Cleaning and maintenance
- User guide copyright
- Safety instructions
- Cautions
- Specifications
- Document release overview
- Warranty
- Regulatory statements
EN-35
BPM Connect
v1.0 | July 2019
On Android:
1. Go to Settings and select Bluetooth.
2. Select the gear icon next to BPM Connect.
3. Select Forget or Remove.
BPM Connect can now be reset to factory settings. To reset BPM Connect,
perform the following steps:
1. Press and hold the monitor's button for 6 seconds until System is displayed on
the screen.
2. Press the button until Reset is displayed on the screen.
3. Press and hold the monitor's button for 2 seconds.
4. Press the button 5 times as the display counts down from 5.
BPM Connect has now been reset.
Once the factory reset is complete, you can reconfigure BPM Connect. Please
refer to "Setting up" on page8 for more information.