Operation Manual
EN - 21
Withings Thermo
v1.0 | July 2016
Assigning a measurement
To assign a measurement from your Withings Thermo, perform the following steps:
1. As soon as the temperature comes up, slide your nger up or down on the touch
sensitive area of the display to select the correct user.
2. Press the button to conrm your choice.
The fever status LED turns on. Your Withings Thermo will power off after a few seconds.
Your measurement is sent to the app after your Withings Thermo turns off.
Understanding the fever status LED
The color of the LED indicates at a glance whether or not the person has a fever. This
is based on the temperature and the user’s age range. The severity of the fever is also
clearly visible based on the color shown.
You’ll nd below the fever status for each age range:
Viewing the history of my measurements
Once you’ve assigned a measurement from your Withings Thermo, you can check
the history of measurements for the user. To do so, slide the touch sensitive area
of your Withings Thermo from bottom to top to go back in time.
You can see the last ve measurements taken in the past 72 hours.