User Manual
Table Of Contents
- Minimum requirements
- Withings Thermo description
- Setting up my Withings Thermo
- Customizing the settings of the Withings Thermo
- Using my Withings Thermo
- Using the Withings Thermo app
- Getting personalized advice
- Dissociating my Withings Thermo
- Cleaning and maintenance
- Specifications
- Document release overview
- Warranty
- Regulatory statements
EN-23
Withings Thermo
v2.0 | April 2018
Assigning a measurement
To assign a measurement from your Withings Thermo, perform the following
steps:
1. As soon as the temperature comes up, slide your finger up or down on the
touch sensitive area of the display to select the correct user.
2. Press the button to confirm your choice.
The fever status LED turns on. Your Withings Thermo will power o after a few
seconds. Your measurement is sent to the app after your Withings Thermo
turns o.
Understanding the fever status LED
The color of the LED indicates at a glance whether or not the person has a fever.
This is based on the temperature and the user’s age range. The severity of the
fever is also clearly visible based on the color shown.
You’ll find below the fever status for each age range:
Viewing the history of my measurements
Once you’ve assigned a measurement from your Withings Thermo, you can check
the history of measurements for the user. To do so, slide the touch sensitive area
of your Withings Thermo from bottom to top to go back in time.
You can see the last five measurements taken in the past 72 hours.