Operation Manual

EN - 47
Withings Aura ™
v2.0 | July, 2015
8. Tap Done.
The calibration of your sensor starts. This step can last up to 10 minutes during which a
LED is lit up and a buzzing sound can be heard. Do not sit on the bed while the LED is on. It
will automatically switch off when you can start using the sensor.
Installing your Sleep Sensor later on
You can also install your Sleep Sensor at a later stage, for example if you don’t purchase it
at the same time as your Connected Alarm Clock. To do so, perform the following steps:
1. Go to My devices.
2. Tap Aura Connected Alarm Clock.