Operation Manual
EN - 58
Withings Aura ™
v2.0 | July, 2015
Cleaning and Maintenance
Cleaning Your Sleep Sensor
You can wash the cover of the Sleep Sensor when necessary. To do so, perform
the following steps:
1. Carefully remove the sensor assembly from the cloth cover.
2. Wash the cover in a washing machine.
Washing temperature must not exceed 30°C (86°F).
Deating Your Sleep Sensor
If you stop using your Sleep Sensor, you should make sure to deflate it before putting it
away. To do so, perform the following steps:
1. Unplug the sensor.
Your Connected Alarm Clock has to remain plugged in for the rest of this procedure.
2. Roll the sensor tightly towards the Withings logo.
3. Reconnect the sensor to the Connected Alarm Clock while making sure you hold it rmly
so that it stays in place.
4. Press the sensor down as the air vacuum starts.
You should be able to hear the air escape.
5. Unplug the sensor when the green LED flashes.
Updating the Firmware
We regularly offer new rmware so that you can benet from the latest features we add
to our products. When new rmware is available, it is automatically installed without any
prompt from the Withings Health Mate ™ app.
Note: You can check which rmware versions your Withings Aura ™ is currently using
in My devices > Aura Connected Alarm Clock and My devices > Aura Sleep Sensor.