Operation Manual
EN - 48
Withings Aura ™
v2.0 | July, 2015
12. Tap Done.
The calibration of your sensor starts. This step can last up to 10 minutes during which a
LED is lit up and a buzzing sound can be heard. Do not sit on the bed while the LED is on. It
will automatically switch off when you can start using the sensor.
Installing your Sleep Sensor on a separate account
If you have two Sleep Sensors, you can either install both of them on the same Withings ™
account, or install them on separate accounts. To install the second sensor
on another account, perform the following steps:
1. Log in to the Withings Health Mate ™ app as the user of the second sensor.
2. Install your Connected Alarm Clock on this account.
Refer to “Installing your Connected Alarm Clock with no existing account” on page12
or “Installing your Connected Alarm Clock with an existing account” on page16 for
more information.
3. Install your Sleep Sensor.
Refer to “Installing your Sleep Sensor at the same time as your Connected Alarm Clock”
on page42 for more information.