Operation Manual

EN - 44
Withings Aura ™
v2.0 | July, 2015
5. Tap the sensor in the Withings Health Mate ™ app and tap the user you want to assign.
This step is only necessary if you have several users on your Withings ™ account.
6. If you want to install a second sensor, repeat steps 2 to 5.
If you want to install the second sensor on another account, refer to “Installing your
Sleep Sensor on a separate account” on page48.
7. Tap Done.
The calibration of your sensor starts. This step can last up to 10 minutes during which a
LED is lit up and a buzzing sound can be heard. Do not sit on the bed while the LED is on. It
will automatically switch off when you can start using the sensor.
Installing your Sleep Sensor later on
You can also install your Sleep Sensor at a later stage, for example if you don’t purchase it
at the same time as your Connected Alarm Clock. To do so, perform the following steps:
1. Go to My devices.