Operation Manual

EN - 27
Withings Aura ™
v2.0 | July, 2015
Enabling the Alarm from the Withings Health Mate ™
If your alarm is set but not enabled, you can enable it by tapping the Withings Aura ™ widget
and tapping the slider of your alarm.
If all alarms have been disabled from the Connected Alarm Clock, tap Reactivate from the
Withings Aura ™ widget.
Enabling the Alarm from the Connected Alarm Clock
Once you have set up your alarm from the Withings Health Mate ™ app,
you can easily enable it from the Connected Alarm Clock if it has been deactivated
from there. To do so, touch and hold the right side of your Connected Alarm Clock for two
to three seconds. The word “ON” is displayed on your Connected Alarm Clock
and you retrieve the same alarm setup as before the alarm deactivation. For example,
if two alarms were deactivated in the Withings Health Mate ™ app and one was activated,
you’ll go back to this setup.
Alarms that have been disabled from the Withings Health Mate ™ app can only
be reactivated from the app.