Operation Manual
EN - 12
Withings Aura ™
v2.0 | July, 2015
Setting Up the Connected Alarm Clock
Installing the Withings Health Mate ™ App
If the Withings Health Mate ™ app is not already installed on your device, perform
the following steps:
1. Type go.withings.com in your device’s web browser.
2. Tap Android App on Google play.
3. Tap INSTALL.
The installation process starts.
Plugging In Your Connected Alarm Clock
Before installing your Connected Alarm Clock, make sure that you read
our recommendations in “Use and Storage” on page2.
1. Place your Withings Aura ™ on a nightstand near your bed, so that your face is
in the light halo of the product when you are asleep.
It should be about one meter (39 inches) away from your head.
2. Select the correct plug adapter from the travel adapter plug set.
3. Locate the top side of the plug adapter (labeled “TOP” on the adapter).
4. Locate the top side of the AC power supply (labeled “TOP” on the power supply).
5. Insert the tab located on the top side of the plug adapter in the notch located on the top
side of the AC power supply.
6. Push the plug adapter until you hear a click.
Make sure the adapter is properly inserted. If not, pull the button to disengage it and try
inserting it again.
7. Connect the power supply cable to your Connected Alarm Clock.
8. Plug the power supply cable to an outlet.
A solid dot appears on the display of your Connected Alarm Clock. After a minute or so,
the time is displayed (00:00 by default).
Installing your Connected Alarm Clock with no existing account
If you don’t already have a Withings ™ account, you have to create one in order to set up
and use your Connected Alarm Clock. If you already have an account, refer to “Installing
your Connected Alarm Clock with an existing account” on page16.
To install your Connected Alarm Clock, perform the following steps:
1. Open the Withings Health Mate ™ app.