Owner's Manual

Safety and Performance
Immunity test
IEC 60601 Test Level
Compliance level
Electrical fast transient/
2 kV for power supply lines
N/A
burst IEC 61000-4-4 1 kV for input/output lines
Surge IEC 61000-4-5
1 kV differential mode N/A
2 kV common mode
Voltage dips, short -5% UT (95% dip in UT) for 0.5
N/A
interruptions and voltage cycles. -40% UT (60% dip in
variations on power UT) for 5 cycles, -70% UT (30%
supply input lines dip in UT) for 25 cycles. -5% UT
IEC 61000-4-11 (95% dip in UT) for 5 sec
Power frequency
30A/m 30A/m
(50/ 60Hz) magnetic
50 Hz or 60 Hz 50 Hz and 60Hz
field IEC 61000-4-8
37
Electromagnetic environment-guidance
The main power quality should be of the kind used
in a typical commercial or hospital environment.
The main power quality should be of the kind used
in a typical commercial or hospital environment.
The main power quality should be of the kind used
in a typical commercial or hospital environment.
If the user of the equipment or system requires
continued operation during power main
interruptions, it is recommended that the equipment
or system be powered from an interruptible power
supply or a battery .
The power frequency magnetic field should be at
levels characteristic of a typical location in a typical
commercial or hospital environment.