Owner's Manual
Table Of Contents
- Installation and Operating Instructions
- Minimum requirements
- Withings Thermo description
- Setting up my Withings Thermo
- Customizing the settings of the Withings Thermo
- Using my Withings Thermo
- Using the Withings Thermo app
- Getting personalized advice
- Dissociating my Withings Thermo
- Cleaning and maintenance
- Specifications
- Document release overview
- Warranty
- Regulatory statements
- Quick Installation Guide
- Regulatory information
RF
Statement
Medical Electrical Equipment needs special precautions regarding EMC
and
needs
to
be
installed
and
put
into
service according
to
the
EMC information
provided
in the following.
- Interference may occur in
the
vicinity
of
equipment
marked with.
- Portable and
mobile
RF
communication
equipment
(e.g. cell phones)
can affect Medical Electrical Equipment.
-The use
of
accessories and cables
other
than those specified may result
in increased emissions
or
decreased immunity.
-The device uses
RF
energy only
for
its internal function. Therefore,
its
RF
emissions are very low and are
not
likely
to
cause any interference
in nearby electronic equipment.
-The device
is
suitable
for
use in all establishments,
including
domestic
establishments
and
those directly connected
to
the
public
low
voltage
power
supply network
that
supplies buildings used
for
domestic purposes.
- Portable and
mobile
RF
communications
equipment
should
be
used
no
closer
to
any
part
of
the
device, including cables, than
the
recommended
separation
distance calculated
from
the equation applicable
to
the
frequency
of
the
transmitter.
-
The
device
is
intended
for
use in an electromagnetic environment in which
radiated
RF
disturbances are controlled.
Any
other
accessories, transducers
and cables may result in increased emissions
or
decreased immunity and EMC
performance.
-
The
device should
not
be
used adjacent
to
or
stacked with
other
equipment
and
that
if
adjacent
or
stacked use is necessary, which should
be
observed
to
verify normal operation in
the
configuration in which
it
will
be
used.
1 1
Medical Electrical Equipment needs special precautions regarding EMC and
needs
to
be
installed and
put
into
service according
to
the EMC information
provided in
the
following. Portable and
mobile
RF
communication
equipment
(e.g. cell phones) can affect Medical Electrical Equipment.
-The use
of
accessories
and
cables
other
than those specified may result
in increased emissions
or
decreased immunity
of
the unit.
Guidance and manufacturer's declaration-electromagnetic emissions
The
Withings
Thermo
Is
intended
for
use
in
the electromagnetic environment specified
below. The customer
or
the
user
of
the
Withmgs Thermo should assure that
it
is used
in
such an environment.
Emissions test
Compliance
Electromagnetic
environment
-
guidance
The SCT01 Withings
Thermo
uses
RF
energy
only
for
its internal function. Therefore,
--------------
,ts
RF
emissions are very low
and
are
not
likely
CE
em,ss,ons
CISPR11
Group
1
RE
emissions
CISPR11
Class B
to
cause any interference In nearby electronic
equipment.
Not
applicable
The
SCT01
Withings Thermo is suitable
for
use
in all establishments, including
domestic
--------------
establishments
and
those directly connected
Voltage fluctuations/
Not
applicable
to
the
public
low-voltage
power
supply
Harmonic emissions
IEC 61000-3 2
Flicker emissions
network
that supplies
buildings
used
for
IEC 61000-3-3
domestic
purposes.