User's Manual

MTK952 User Manual
rev.06
7
MENU TREE
MAIN
Ch-Gr
CH: 00 ÷ 59 GR: 00 ÷ 39
Frequency: 470÷800 MHz
Group name
Mode
ENR-Wisy Stereo / EVO Stereo / ENC-Wisy Stereo / SR Stereo / ENR-
Wisy / ENC-Wisy / IFB-Wisy/ EVO / SEN / SEN -d0 / COM-Wisy 25K /
COM-Wisy 20K / COM-Wisy 12K5 / USER 1..7 / *
1
TX on air at
startup
Yes / No
TX Power 10/20/ 30 /50 / 75 /100/ 150 /200 /250/400/500/750/1000/1200/1500 /2000 mW
EXT ATT compens.
enable / disable
Audio source
Input Analog / digital
Max audio level
-6 ÷ 18 dBµ
Audio gain left -20 ÷ 24 dBµ
Audio gain right -20 ÷ 24 dBµ
AF level meter input / modulation
Mono config *
2
mono/mono-R / mono-L
Auto switch DIG->AN
enabled / disabled
Equalizer
Bass
G: -12 ÷ 12 dB
Fr: 40 / 80 / 160 Hz
Mid
G: -12 ÷ 12 dB
Fr: 1.5 / 2.2 / 2.8 KHz
Q: 0.7 / 1.0 / 2.0
Treble
G: -12 ÷ 12 dB
Fr: 5.0 / 7.0 / 10.0 KHz
SAVE/NEXT/ EXIT
Options
Name
DISPLAY brightness 0 ÷ 15
DISPLAY timeout 5 ÷ 120
Info…
IP
Serial
Option
Range
Power profile
Temperatures
RF amplifier
RF generator
Micro
Power supply
FW
FW ver
Boot ver
App FW ver
DSP FW ver
Supply diagnostic
Neg Audio (-12v5)
Pos Audio (+12v5)
RF conv. (+5v)
RF amplif. (+3v3)
MicroP. (+5v)
MicroP. (+8v)*
3
Main RAW (+12v)
PLL tune (+22v)
Alarms
TX
configuration
master/slave
*
1
Depending on the customization
*
2
Only with a Mode “mono”
*
3
+3v3 for MTK952 “old version”
Only for MTK952N with M-S option
Only with option 2W0