User manual

MCR41-MCR42 User Manual
rev.10
35
NOTE
2
: It’s possible to do a multi-selection to change simultaneously frequency/propriety
(Hidden/Locked) or write/read the device memory related of the selected boxes. To select
multiple boxes click and drag from a box to another (or using Shift + click) or select some
singular boxes by pressing Ctrl and clicking on the box (when a box is selected become
blue)
Load:
Push the button Memory view or select the File>Open menu and select the .wdf file to load. This
operation loads the channels configuration in the central grid (local). In order to load the channels
configuration in the MCR41/42, after a Load operation, it is necessary to do a Write operation.
Write:
Push the button Write channels memory: this operation writes the channels configuration showed
in the central grid to the channels memory of the MCR41/42.
Clear:
Select the Channels memory menu and select Clear. This operation clears only the channels
memory showed in the grid (local). In order to clear the channels memory in the MCR41/42, after a
Clear operation, it is necessary to do a Write operation.
Save:
Select the File>Save menu and decide the name of .wdf to save. This operation create a .wdf file
using the channels configuration showed in the central grid, it doesn’t save the configuration in the
MCR41/42.
NOTE
3
: Read and Write operation require around 1 minute.
NOTE
4
: For small changes of channels memory, it is possible to select only the modified cells and
write only the changes. In this case only the selected channel/group are written to the MCR41/42
and the writing process is more fast.
NOTE
5
: For MCR41 only one receiver is showed and can be configured.
For more information or support, download the user manual of MCR41/42 at the following link
http://www.wisycom.com/www3/products/product/mcr42#4 or email us at
[e-mail]