User manual

rev.10

MCR41-MCR42 User Manual

BPA42BAG: Stand alone socket

Line1 (pigtail)

• Analogue audio output electronically balanced, adjustable in a one dB step between -30/-18dBu

(depending on the Hardware version) and +6 dBu (nominal) and MAX +12 dBu (peak deviation)

• Audio line-output imped. : ≤ 200 ohm.

• Digital Audio Output of Line 1 & 2 electronically balanced

• Digital line-output : AES3 @ 48 kHz

Line2 (pigtail)

• Analogue audio output electronically balanced, adjustable in a one dB step between -30/-18dBu

(depending on the Hardware version) and +6 dBu (nominal) and MAX +12 dBu (peak deviation)

• Audio line-output imped. : ≤ 200 ohm.

Line 1 / 2 pinout:

 Shield = GND

 RED cable = Positive

 BLUE cable = Negative

DC power supply (pigtail)

 Shield = Not Connected

• RED cable = +Vdc

• BLUE cable = GND

 XXH OPTION :

BPA42BAG with connectors (2 XLR-3M and Hirose 4pin)

LINE1

LINE2

Although phantom power is defined over a parallel resistance of 6k8, some mixer without

transformer are using very high capacitor without any limiting (or just some Ohm)

impedance. That can cause a surge current on BPA42-PTT/HPN/BAG voltage protection.

TO AVOID ANY PROBLEM CONNECT THE DEVICE WITH MIXER TURNED OFF.