User Manual

3. Charging the battery
Your monitor is shipped with an AC adapter to charge your monitor from any standard
AC power outlet.
Note: The battery is not fully charged when shipped.
When warning window remind you less than 10% battery to have to shut down,
your monitor's battery need charge, please take the following actions:
1. Plug the AC adapter into a standard AC power outlet.
2. Disconnect the AC adapter from your monitor when the battery power is full,
or leave the AC adapter connected to operate from AC power.
2. To install the monitor driver, follow the on-screen instructions.
a. Connect the USB cable to the USB port of the side of the monitor and the other two ends
to the appropriate USB ports on your computer.
b. To install the monitor driver, you can find the driver setup file in the monitor mass storage
USB disk. For detailed Setup steps, please see " Chapter 4".
Remark:
a. To ensure optimal display performance, connect the monitor to your PC using a USB 3.0 and
a USB 2.0 port at the same time. Using only one USB 2.0 port may decrease the level of the
display brightness.
b.
Chapter 1. Getting started 1-7
在无线显示模式下，通过ＵＳＢ连接线连接到电脑，无线显示模式会自动关闭并切换到有线模式。
如果需要再次开启无线显示模式，请先移除ＵＳＢ连接线。