Installation Guide

8
□ Normal □ Internal Use ■ Confidential □ Restricted Confidential
J-Pole Installation
• (If need)Loosen 2 nuts and re-adjust pole angle to
best meet base station direction.
• Tighten 2 elbow nut to fix the angle:
Torque: 140 +/-10 kgf-cm
Torque: 10.12 +/-0.72 lbf-ft
3
4
• Screw information:
Unit: mm
• Tighten 4 screws to fix the base
bracket onto the wall.
Screw Type: ¼”x2” Wood Screw
Screw Head: HEX head