Installation Guide

35
□ Normal □ Internal Use ■ Confidential □ Restricted Confidential
IDU Bracket for Window Mount
1. Clean the heavy stain/dust on window by window cleaner.
2. Clean immediate area where mount will be attached to, use provided alcohol wipes to remove light dirt
and the film left from window cleaner.
3. Peel off protective film from the Gecko tape on the indoor bracket. Then affix the indoor bracket on the
window in the direction indicated by the arrow on the bracket.
4. Using both two thumbs to exert solid pressure holistically for 30 seconds in all areas where Gecko tape
makes contact with the glass. If possible, check adhesion area by looking from the outside.
5. The lazy Susan feature can be used to adjust position of Indoor Bracket.
Gecko tape
Protective film