Installation Guide

21
□ Normal □ Internal Use ■ Confidential □ Restricted Confidential
Pole Mount Installation
• Tighten bracket on a pole by using 2 hose clamps
• Use torque wrench(with hex socket) to tighten 2
screw on hose clamps:
• Hang the ODU on the bracket by using 4 screw heads and insert
into the slot hole
• Put down the ODU, the screw heads will fix ODU on bracket.
21
Screw Heads
Slot holed
Put down
the ODU
Torque: 50.2~61.2 kgf-cm
Torque: 3.61~4.41 lbf-ft
Pole diameter range: 1.25~1.66inch