User's Manual

10

Pendant Mount 2.4
Refer to the steps below to mount the Access Point to a pendant mount.
1. Align the pendant mount screw holes on the main bracket with the holes
on the pendant mount.
2. Use the pendant mount screws (M4 screws; length: 12.7 mm; material:
normal aluminum, non-surface treated) to securely affix the main bracket
to the pendant mount.
3. Align the screw holes on the main bracket with the corresponding holes on
the back of the Access point, then use four M4 screws to attach the main
bracket to the Access Point.
Note: Make sure the arrow on the main bracket is aligned so that it is pointing
toward the top side of the Access Point.