User Guide

LED and Audio Behavior
Receiver LED Definition:
Status
PWR LED
Sound
Boot up
Power On / Normal Operating Mode
Solid White
Not Applicable
Bluetooth
Pairing BT (Shows for 60 seconds or until
the device is paired)
Cyan to OFF to Green to OFF (switch every
200 ms)
Not Applicable
BT connection successful
Cyan blinking (200 ms ON, 200 ms OFF) × 3
Not Applicable
BT connection failure
Red blinking (200 ms ON, 200 ms OFF) × 3
Not Applicable
Changing modes manually
Changing from installation mode to regular
mode (press and hold RESET button for at
least 3 seconds)
Cyan blinking (200 ms ON, 200 ms OFF) × 3
Not Applicable
Installation mode enabled
Solid Amber
Not Applicable
Changing from regular mode to installation
mode (press and hold RESET button for at
least 3 seconds)
Amber blinking (200 ms ON, 200 ms OFF) × 3
Not Applicable
FW Updated
FW updating
Green blinking (200 ms ON, 200 ms OFF) × 3
until FW update is completed
Not Applicable
Status
LAN
LED
Sound
LAN
Ethernet port is connected and active
Solid White, Link partner advertisement speed
is equal or higher than 1 Gbps (ETH0)
Not Applicable
Ethernet Port Trouble
Solid Red, Link partner advertisement speed is
less than 1 Gbps (ETH0)
Not Applicable
Status
DATA
LED
Sound
Regular mode