User Guide

Step 3: Drill installation holes and install the bracket
Use a power screwdriver to drill holes in the marked locations, then take two wall anchors and place them into the
holes (make sure the tops of the anchors are flush with the wall).
Step 4: Install bracket
Align the holes on the indoor bracket with the wall anchors, then take two screws from the indoor wall screw pack and
screw them into the wall anchors.
Step 5: Install the device onto the bracket
After installing the bracket, place the device onto the bracket (refer to step 5 of the indoor glass window mounting
process) and conduct cable management as needed.