User Guide

• Tighten 4 screws to fix the base bracket onto the wall.
• Screw information:
Step 5:
• (If need) Loosen 2 nuts and re-adjust pole angle to best meet base station direction.
• Tighten 2 elbow nut to fix the angle:
Step 6:
Unit: mm
Screw Type: ¼”x2” Wood Screw
Screw Head: HEX head
Torque: 140 +/-10 kgf-cm
Torque: 10.12 +/-0.72 lbf-ft