User Manual

40
3. Check the Include Windows Logon Domain with User Name setting to pass the
Windows login domain and user name to the RADIUS server (default).
4. Check No Network Connection Unless User Is Logged In to force the wireless
adapter to disassociate after logging off (default).
5. Enter the LEAP authentication timeout time (between 30 and 500 seconds) to
specify how long LEAP should wait before declaring authentication failed, and
sending an error message. The default is 90 seconds.
6. Click OK.
7. Enable the profile.
4.4.11 Using WPA Passphrase Security
To use WEAP Passphrase security in the WLAN 802.11g Utility, access the Security
tab in the Profile Management window.
1. On the Security tab, click WPA Passphrase.
2. Click Configure.
3. Fill in the WPA Passphrase.
4. Click OK.
4.4.12 Using Pre-Shared Key (Static WEP) Security
To use Pre-Shared Key (Static Web) security in the WLAN 802.11g Utility, access
the Security tab in the Profile Management window.
1. On the Security tab, click Pre-Shared Key (Static WEP).
2. Click Configure.
3. Choose Hexadecimal or ASCII Text and then fill in the value of each WEP Key.