User Manual

37
5. Click Advanced and Advanced Configuration window appears.
ü Enter the Specific Server or Domain name of the server from which the
client will accept a certificate.
ü The login name used for PEAP tunnel authentication fills in automatically as
PEAP-XXXXXXXXXX, where XXXXXXXXXX is the computer’s MAC
address. Change the login name if needed.
6. Click OK.
7. Enable the profile.
4.4.7 Using PEAP-MSCHAP V2 Security
To use PEAP-MSCHAP V2 security in the WLAN 802.11g Utility, access the
Security tab in the Profile Management window.
1. On the Security tab, click WPA/WPA2 or 802.1x.
2. Select PEAP- MSCHAP V2 from the drop-down menu.
4.4.8 Enabling PEAP- MSCHAP V2 Security
To use PEAP-MSCHAP V2 security, the server must have the PEAP-MSCHAP V2
certificates, and the server properties must already be set. Check with the IT manager.
1. Click Configure.
2. Select the appropriate network certificate authority from the drop-down list.