User's Manual
Table Of Contents
- Introducing the 802.11a/g Router
- Installing the 802.11a/g Router
- What’s in the Box?
- A physical look at the back panel
- A physical look at the front panel
- Connecting the Cables
- High Level Configuration Steps Required for the 802.11a/g Router
- Setting up a Windows PC or wireless client as DHCP clients
- Configuring a PC running MS-Windows 95/98/Me:
- Configuring a PC running MS-Windows XP/2000:
- Confirming your PC’s IP Configuration:
- Connecting More Devices Through A Switch/Hub To The 802.11a/g Router
- Basic Configuration of the 802.11a/g Router
- Advanced Settings
- Managing your 802.11a/g Router
- How to View the device Status
- How to View the System Log
- Security Log
- DHCP Client Table
- Wireless Client Table
- Bridge Table
- WAN Status
- LAN Status
- Upgrading Firmware
- How to Save or Restore Configuration Changes
- How to Restore the System Settings to the Factory Defaults
- How to Reboot your 802.11a/g Router
- What if you Forgot the Password?
- Command Line Interface
- Text Configuration
- Specification
802.11a/g Router User’s Guide
localKeyID:…
When ‘RadiusSvrCAState’ is ‘disable’ and
‘RadiusSvrEAPAuthType’ is ‘tls’, the following items
should be configured:
RadiusSvrCert: the certificate of the built-in RADIUS
server.
RadiusSvrCertPasswd: the password to use the built-
in RADIUS server’s certificate.
RadiusSvrCACert: the certificate of the CA issuing
the built-in RADIUS server’s certificate.
[RadiusClient]
RadiusCltName=client1
RadiusCltIP=192.168.1.10
RadiusSecret=password
RADIUS Client Database Configuration
T
here could be multiple entries (max 20 entries), each
entry contains the following items:
RadiusCltName
: a mnemonic name for the RADIUS
client.
RadiusCltIP: the IP address of the RADIUS client.
RadiusSecret
: the shared secret to authenticate the
RADIUS client.
[RadiusMD5UserEntry]
RadiusMD5UserName=md5user
RadiusMD5Passwd=password
RADIUS MD5 User Database Configuration
T
here could be multiple entries (max 20 entries), each
entry contains the following items:
RadiusMD5UserName
/RadiusMD5Passwd: the user
name and password for the MD5 user.
[RadiusPAPUserEntry]
RadiusPAPUserName=papuser
RadiusPAPPasswd=password
RADIUS PAP User Database Configuration
There could be multiple entries (max 20 entries), each
entry contains the following items:
RadiusPAPUserName
/RadiusPAPPasswd: the user
name and password for the PAP user.
[CA]
CACertificate=-----BEGIN RSA
PRIVATE KEY-----…
Certificate Authority
This section is used by the system to store the
certificate of the built-in CA, no matter the built-in
CA is enabled or not. Users should not modify the
content this section.
[DDNS]
DDNSState=enable
DDNSHostname=myname.mydo
main.com
Dynamic DNS Configuration
DDNSState: whether the Dynamic DNS function is
enabled (‘enable’, ‘disable’).
85