User Manual

17
5.3 Configuration Page
“Configuration” page allows you to edit/modify settings of a network. You may
enter a network name in SSID field and click “Apply” to join a specific network.
n SSID: The name of the wireless network. This name cannot be longer
than 32 characters. The default value is “any”, which will automatically
scan and connect the best performance Access Point nearby.
n Wireless Mode: Two options are available--Infrastructure and 802.11 Ad
Hoc.
n Channel: Every station in the network should set the same number of
Channel. Different countries have different channel ranges.
n Tx Rate: Four options are “Fully Auto”, “1Mbps”, “2Mbps”, “5.5Mbps”
and “11Mbps”.
n Power Saving Mode: Allows you to enable or disable Power Saving
function. Three options are Disabled, Normal and Maximum.
n Apply: Click “Apply” button to save and implement the new settings.
n Cancel: Click “Cancel” button to cancel the modification of the settings.
n Profile: You may create several Profiles to save different sets of network
settings for a network; doing so allows you to switch network settings easily.
Please refer to Chapter 5.7 Profile for other information.