User's Manual

Subject: UMC-SKV2C User Manual REV: 0.5
PAGE 5 OF 19
Wistron Neweb Corporation Proprietary & Confidential
Design Document
2. Test Setup Configuration
2.1 Power Supply and Debug Console Connection
Power on Sequence:
I. Connect 30-pin-to-Jig-baord cable
II. Attach AC-DC Adaptor & USB Debug Port Cable
III. Wait for 20 seconds when system ready
[Caution] Improper power on sequence might lead to system boot-up
failure!
Interface Board
DUT (CB)