User's Manual

[MACFilter]
MACFilterPolicy =disable
MAC Filter Configuration
MACFilterPolicy: MAC Filter policy (‘disable’, ‘deny’,
‘grant’).
[MACFilterEntry]
MACFilterName=name
MACFilterMAC=00-01-30-05-70-
aa
MAC Filter Entry Configuration
There could be multiple entries (max 1024 entries),
each entry contains the following items:
MACFilterName
: a mnemonic name for the entry.
MACFilterMAC
: the MAC address that the filter will
be applied on.
[RADIUS]
RadiusRetryTimes=3
RadiusReattempPeriod=60
RadiusMACACLState=enable
RADIUS Configuration
RadiusRetryTimes: number of retries before giving
up.
RadiusReattempPeriod: re-attempt period (unit:
minute).
RadiusMACACLState: whether enable MAC address
access control (‘enable’, ‘disable’)
[PrimaryRADIUS]
[SecondaryRADIUS]
RadiusPrimaryState=enable
RadiusPrimaryIP=1.1.1.1
RadiusPrimaryPort=1812
RadiusPrimarySharedSecret=1111
RadiusSecondaryState=enable
RadiusSecondaryIP=2.2.2.2
RadiusSecondaryPort=1812
RadiusSecondarySharedSecret=22
22
External Primary/Secondary RADIUS Server
Configuration
RadiusPrimaryState
/RadiusSecondaryState: whether
use the external primary/secondary RADIUS server
(‘enable’, ‘disable’).
If the ‘RadiusPrimaryState’/’RadiusSecondaryState’ is
‘enable’, the following items have to be configured:
RadiusPrimaryIP/RadiusSecondaryIP: the IP address
of the external primary/secondary RADIUS server.
RadiusPrimaryPort/RadiusSecondaryPort: the port
number on the external primary/secondary RADIUS
server.
RadiusPrimarySharedSecret/RadiusSecondarySharedS
ecret: the shared secret used for authentication with
the external primary/secondary RADIUS server.
[QOS]
QOSState=enable
QOSMapScheme=802.1p
VLANPrio0=normal
VLANPrio1=low
VLANPrio2=low
VLANPrio3=normal
VLANPrio4=high
QoS (Quality of Service) Configuration
QOSState: whether enable the QoS function (‘enable’
or ‘disable’).
QOSMapScheme: the QoS mapping scheme, when
‘VLANState’ in [VLAN] is ‘disable’, this must be
‘none’ (‘none’ – use the priority level configured,
‘802.1
p
’
–
use the 802.1
p
value and ma
pp
in
g
59