User's Manual

TPNetBios: whether enable NetBIOS traffic pattern
on the session (‘enable’, ‘disable’).
The following items can appear more than one in a
multiple PPPoE entry:
TPRuleIPRange
: specify an IP address range traffic
pattern.
TPRuleNetwork: specify an IP network traffic
pattern.
TPRulePortRange: specify a port range traffic
pattern.
TPRuleKeyword: specify a keyword traffic pattern.
[CloneMAC]
CloneMACState=disable
CloneMAC=00-01-02-03-04-05
Clone MAC Configuration
CloneMACState: whether enable the clone MAC
function (‘disable’, ‘enable’).
CloneMAC: the MAC address to be cloned.
[Radio]
SSIDBoradcast=enable
Radio1Mode=11a
Radio1Channel=auto
Radio2Mode=11g/b
Radio2Channel=auto
Radio1TxPower=100
Radio2TxPower=100
PrivSeparatorState=disable
BeaconInterval=100
RTSThreshold=2347
Fragmentation=2346
DTIMInterval=3
UserLimit=100
WLAN Configuration
SSIDBoradcast: whether enable SSID broadcast.
Radio1Mode
: radio mode of radio 1 (‘11a’, ‘11at’-a
turbo, ‘11sa’-super a without turbo, ‘11sast’-super a
with static turbo, ‘11sadt’-super a with dynamic
turbo).
Radio2Mode: radio mode of radio 2 (‘11g/b’-11g or
11b, ‘11g’, ‘11gt’-g turbo, ‘11sg’-super g without
turbo, ‘11sgst’-super g with static turbo, ‘11sgdt’-
super g with dynamic turbo).
Radio1Channel/Radio2Channel: channel number (1,
2, 3… or ‘auto’).
Radio1TxPower/Radio2TxPower: the transmit
power of the radio 1/2 (100, 75, 50, 25, 12).
PrivSeparatorState: whether enable privacy separator
(‘enable’, ‘disable’).
BeaconInterval
: beacon interval (unit: msec).
RTSThreshold
: RTS threshold (unit: byte).
Fragmentation
: fragmentation threshold (unit: byte).
DTIMInterval
: DTIM interval.
UserLimit: user limitation count.
[VLAN]
VLANState=enable
Multiple SSID VLAN Configuration
VLANState
: whether enable the VLAN function with
each SSID setting (‘enable’, ‘disable’).
[DiffServ]
DiffServState=enable
DiffServ Marking Configuration
DiffServState: whether enable the DiffServ markin
g
55