User's Manual

Step 2 To update the 802.11A+G ACCESS POINT firmware, first download the firmware
from the distributor’s web site to your local disk, and then from the above screen enter the
path and filename of the firmware file (or click Browse to locate the firmware file). Next, Click
the Upgrade button to start.
The new firmware will begin being loaded to your 802.11A+G ACCESS POINT. After a
message appears telling you that the operation is completed, you need to reset the system to
have the new firmware take effect.
Note: It is recommended that you do not upgrade your 802.11A+G ACCESS POINT unless the new
firmware contains a new feature that you want or if it contains a fix to a problem that you’ve encountered.
How to Save or Restore Configuration Changes
You can save system configuration settings to a file, and later download it back to the
802.11A+G ACCESS POINT by following the steps below.
Step 1 Select Configuration Save and Restore from the System Tools menu and you will
see the following screen:
41