User's Manual

DTIM Interval: The 802.11A+G ACCESS POINT buffers packets for stations that operate
in the power-saving mode. The Delivery Traffic Indication Message (DTIM) informs such
power-conserving stations that there are packets waiting to be received by them. The DTIM
interval specifies how often the beacon frame should contain DTIMs. It should have a value
between 1 to 255, with a default value of 3.
User Limitation: Input what’s the maximum users can connect with Access Point through
SSID. The default value is 100.
Enable privacy separator for 2 radio: enable/disable.
Radio 1/Radio 2 Transmit Power: 100%, 75%, 50%, 25%, 12%.
Operational Mode
The 802.11A+G ACCESS POINT can be configured to operate in one of the following three
modes as mentioned previously in Chapter 1:
(1) Access Point (2) Repeater (3) Wireless Distribution System (WDS)
When configured as a WDS, you need to further configure the name and MAC address of its
peer WDS devices.
32