User's Manual

Congratulations! You are now ready to use the 802.11A+G ACCESS POINT.
Note: If you change the device’s IP address, as soon as you click on FINISH you will no longer be able
to communicate with your 802.11A+G ACCESS POINT. You need to change your IP address and then
re-boot your computer in order to resume the communication.
Advanced Settings
The advanced settings tab on the top row of the window allows you to perform modifications
that normally you may not need to do for general operations except changing your password
from the default factory setting (this is highly recommended for security purposes).
Password Settings
The default factory password is “password”. To change the password, press the Password
Settings button to enter the Password Settings screen, then enter the current password
followed by the new password twice. The entered characters will appear as asterisks.
System Management
26