Owner`s manual

“Unlocking”, raise the seat post to its maximum height. Using the handle
on top of the battery lift out the battery.
9.7 To replace the battery reverse the procedure for removing it.
10LCD function description
10.1 The LCD display has the following functions (Refer to picture below).
A: Power ON/OFF button. For details refer to the paragraph below.
B: Up (increase) adjusting button. For adjusting the pedal assistance strength,
and back light brightness.
C: Down (decrease) adjusting button.
D: Set. When pressed, you can set the back light of the LCD and the
single trip distance. If you press it together with C button, you can set the
bike’s tyre size.
E: This shows the instant power consumption extent. A longer bar means
the motor’s output is higher.
F:
Battery capacity. Three bars indicate 80% capacity left, two bars indicate
70% left, one 55% capacity left, half bar 5% capacity left.
G: Instant speed figures.
H: Pedal assistance strength levels.
I: Total riding distance since last reset.
10.2 When the ON/OFF button
is pushed and the capacity indicator goes out
- 11 -