SPECIFICATION PBA RF Module Customer - Model name RP-M2470 Part name WSZGM200C00 Date 2013. 11. 13 REVISION 02 Application Set Top Box CUSTOMER-CODE - WISOL CO., LTD. 373-7, Gajang-dong Gyeonggi-do Osan 447-210 Korea http://www.wisol.co.
PBA RF Module WSZGM200C00 3 ZigBee / 2.4GHz / IEEE802.15.4 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 1. Approval Revision Record NO REASON 1 REV00 2 3 RECORD OF REVISION Remarks Revision Page WSZGM200B00 Approval Releases 2012-03-06 - REV01 FCC ID / IC Number Added - FCC ID : 2ABA2RPM2470 - IC : 11534A-RPM2470 2013-11-11 - REV02 FCC/IC Notice Added 2013-11-13 - 2. Scope This specification is applied to ZigBee / IEEE802.15.
PBA RF Module WSZGM200C00 3 ZigBee / 2.4GHz / IEEE802.15.4 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 4. DC Characteristics Symbol Parameter Min Typ. Max Unit 3V_IN I/O supply voltage(VDDIO) 2.0 3.0 3.6 V VIH High level input voltage 2.5 - 3.6 V VIL Low level input voltage 0 - 0.4 V VOH High level output voltage 2.5 - 3.6 V VOL Low level output voltage - - 0.4 V TA Air temperature -40 - 85 ℃ 5. Electrical Specification (Condition: EVM Board, at 25℃, 3V_IN=3.
PBA RF Module WSZGM200C00 ZigBee / 2.4GHz / IEEE802.15.4 3 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 PM1 - 30 - uA PM2 - 1.25 2 uA PM3 - 0.1 1 uA TX / RX and RX / TX turnaround - - 192 us Min Typ. Max Unit 2405 - 2480 MHz Maximum Input Level (PER=1%) @250kbps - -1 - dBm Received RF Bandwidth - 2 - MHz Channel Bandwidth - 5 - MHz - dBm 6. RF Specifications 6-1.
PBA RF Module WSZGM200C00 3 ZigBee / 2.4GHz / IEEE802.15.4 15x18x.2.5 mm , 45pin, 1mm Pitch Blocking / Desensitization +5MHZ / -5MHz +10MHZ / -10MHz +20MHZ / -20MHz +30MHZ / -30MHz +50MHZ / -50MHz - TX output power Version: 02 -53/-52 -48/-46 -44/-40 -43/-38 -41/-37 - dBm 6 8 9.6 dBm Transmit chip rate - 2 - Mcps Spurious Emission(30Hz~1GHz) - -60 - dBm Spurious Emission(1GHz~12.75GHz) - -45 - dBm Spurious Emission(5.15GHz~5.
PBA RF Module WSZGM200C00 ZigBee / 2.4GHz / IEEE802.15.4 3 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 6-2. Analog Temperature Parameter Min Typ Max Unit Output Voltage at -40℃ - 716 - mV Output Voltage at 0℃ - 847 - mV Output Voltage at 40℃ - 978 - mV Output Voltage at 80℃ - 1109 - mV Temperature Coefficient - 3.
PBA RF Module ZigBee / 2.4GHz / IEEE802.15.4 WSZGM200C00 3 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 7. Specification on Chip Antenna 7 /14 쪽 2013. 11.
PBA RF Module WSZGM200C00 3 ZigBee / 2.4GHz / IEEE802.15.4 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 8.
PBA RF Module WSZGM200C00 3 ZigBee / 2.4GHz / IEEE802.15.4 15x18x.2.5 mm , 45pin, 1mm Pitch Terminal NAME Inter face I/O 24 P3[5] Digital B Port P3.5/T1/CTS0/QUADYB/SPIDO 25 P3[4] Digital B Port P3.4/T0/RTS0/QUADYA/SPIDI 26 P3[3] Digital B Port P3.3/INT1(active low) 27 P3[2] Digital B Port P3.2/INT0(active low) 28 P3[1] Digital B Port P3.1/TXD0/QUADXB 29 P3[0] Digital B Port P3.
PBA RF Module ZigBee / 2.4GHz / IEEE802.15.4 WSZGM200C00 3 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 9. Dimensions & drawing 9-1. Design dimension Table A Weight : 1.04g ※ Table A: Real dimension specification ITEM Width Length Design 15 mm 18 mm Real dimension value 14.90mm(*) 17.90mm(*) (*) : 0.1mm is cut by Dicing blade 9-2. PCB Drawing -1 (Top View) Pads of pin 1~45 ; (W*L: 0.65*1.6mm) Pads of pin 46,49 ; (R=0.75, Circle) Pads of pin 47,48 ; (R=0.625, Circle) Silk (w=0.15mm) 0.
PBA RF Module ZigBee / 2.4GHz / IEEE802.15.4 WSZGM200C00 3 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 9-3. PCB Drawing -2 (Top View) 11 /14 쪽 2013. 11.
PBA RF Module WSZGM200C00 3 ZigBee / 2.4GHz / IEEE802.15.4 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 9-4. Solder mask opening guide PAD TYPE PAD SIZE W: 0.65mm L: 1.60mm MASK open W:0.615mm L:1.76~1.8mm RESULT W: About 95% L: About 110~115% R=0.75mm R=0.35mm 46.7% R=0.625mm R=0.25mm 40% 9-5. Setup guide for an host devices to install the module 12 /14 쪽 2013. 11.
PBA RF Module ZigBee / 2.4GHz / IEEE802.15.4 WSZGM200C00 3 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 10. FCC Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PBA RF Module ZigBee / 2.4GHz / IEEE802.15.4 WSZGM200C00 3 15x18x.2.5 mm , 45pin, 1mm Pitch Version: 02 11. IC Notice IC Statement This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
