User`s guide

7-English
(1) Temperature: actual indoor temperature
(2) Status Indicators:
➤Cool First stage of air conditioning system is running.
➤Heat First stage of heating system is running.
➤➤Cool First and second stage of air conditioning system are running.
➤➤Heat First and second stage of heating system are running.
NOTE: The Status indicators may flash to indicate a start up delay for equipment protection. After a few minutes,
the compressor will start and the Status indicators will stop flashing.
(3) Time: The thermostat’s internal clock. May be entered manually or automatically from the network.
(4) Signal Strength: The strength of the network signal. A series of periods is displayed if no signal is present or if the
thermostat is not connected to a network.
(5) Thermostat Mode: The selected mode, Heat or Cool.
(6) Temperature Setting: The desired temperature for the selected thermostat mode (the mode displayed directly
above this setting). If the thermostat is in Off mode, this area is blank.
(7) Button Functions: Identifies the functions of the task and menu buttons (see page 5). The function of the buttons
varies depending on the screen.
— For Temp, see page 8.
— For Energy, see page 30.
— For Loads, see page 37.
Getting to Know your Thermostat’s Home Screen (Simple Display)