Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual WiSenMeshWAN® Voltage Interface Node User Manual 6C01 Wuxi Wisen Innovation Co., Ltd. August 2021 www.wisencn.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual Revision History and Clarification Rev. Issue Date Revisions Written By Revised By V1.0 19/11/2020 1st Issue Xiaoyan Huang Dr. Yan Wu V1.1 04/08/2021 Minor wording changes. Xinhu Nie Dr. Yan Wu Document Definition: It defines the specifications (i.e.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual Table of Contents 1. Product Introduction................................................................................................................................................... - 4 2. System Structure Layout ............................................................................................................................................. - 5 3. Node & Radio Features ...........................
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual 1. Product Introduction The WiSenMeshWAN® Voltage Interface Node is one of the key products in our patented WiSenMeshWAN® geotechnical safety monitoring system. Working together with the WiSenMeshWAN® gateway product and the specified voltage type sensors, it intelligently delivers the real-time data of voltage type sensors to the information centre.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual 2. System Structure Layout Figure 2. System Structure Layout. www.wisencn.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual 3. Node & Radio Features Node Features: Basics Battery Power Qty. x 1 (3.6V Lithium primary D-Cell ER34615) Accuracy Stop Voltage 2.7VDC Mesh Stop Voltage 2.1VDC Battery Connection Standard Aluminium Battery Holder Working Current (DC) Max. 210mA Local Storage Min. 450 Messages during Meshing LxWxH Interface Node: 100 x 100 x 60mm Weight 0.
Wisen Innovation Technical Doc. No.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual 4. Terminologies Figure 3. Voltage Interface Node Internal Configuration Terminologies 5. Operation Procedures 5.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual to follow to correctly deploy a WiSenMeshWAN® system are: Gateway first, then nearby nodes, then further nodes. 4) During deployment, the Serial Number, i.e., SN of a node and the orientation of the Voltage sensors deployed against their site references must be recorded; 5) All the node should have its antenna point upwards. 5.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual Hardware Switch Vcc_Out Output 0 (default) 1.8V (default) 1 2.5V 2 3.3V 3 5.0V Demo Photo Figure 4. Vcc_Out Switch Setting. 7) Power On: once all the Voltage sensors are connected, turn the switch on. Now you should be able to see 3 LEDs flashing 3 times, which means the node is on.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual A. Remote Inspection of historical data, to identify the following: a) Whether the heart-beat message has been sent back successfully at each time interval; b) Whether the battery voltage is too low, if yes, please change the battery unit; c) Whether the signal strength has become significantly weaker than it was previously. If yes, please check the antenna has been screwed on firmly. B.
Wisen Innovation Technical Doc. No.2021 5 WiSenMeshWAN® Voltage Interface Node - User Manual Inspection Report* Visualisation Platform. 8. Safety and Warning Warning: Please read the following instructions carefully. 1）Operation Safety Before taking any action, please read all the information provided carefully, and keep the guidance documents safe; Ensure that any procedures and installations are correctly carried out.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Voltage Interface Node - User Manual disposal. 9. Contact - Wuxi Wisen Innovation Co., Ltd.: www.wisencn.com - Email: support@wisencn.com www.wisencn.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
