Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual WiSenMeshWAN® Mini Smart Gateway User Manual 6003 Wuxi Wisen Innovation Co., Ltd. August 2021 www.wisencn.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual Revision History and Clarification Rev. Issue Date Revisions Written By Revised By V1.0 17/11/2019 1st Issue Xiaoyan Huang Dr. Yan Wu V1.1 04/08/2021 Minor wording changes. Xinhu Nie Dr. Yan Wu Document Definition: It defines the specifications (i.e.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual Table of Contents 1. Product Introduction................................................................................................................................................... - 4 2. System Structure Layout ............................................................................................................................................. - 5 3. Gateway & Radio Features .............................
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual 1. Product Introduction The WiSenMeshWAN® Mini Smart Gateway is one of the key products in our patented WiSenMeshWAN® geotechnical safety monitoring system. Working together with the WiSenMeshWAN® Node products, it intelligently collects, converts and delivers the real-time information from nodes to a local PC via standard USB connection. The WiSenMeshWAN® Mini Smart Gateway is powered by USB port (5VDC).
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual 2. System Structure Layout Figure 2. System Structure Layout. www.wisencn.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual 3. Gateway & Radio Features Gateway Features: Basics Primary Battery Power USB 5VDC LxWxH 52 x 50 x 40mm Weight < 80g Cable Gland Qty. 1 x USB Connection Local Storage N.A. External Interface Wired Port USB WSN Interface WSN Protocol WiSenMeshWAN® Protocol Standard System Parameter Temperature Range: [-40, 85]°C, Accuracy: ±1°C (Typ. 0.5°C), Resolution: 0.1°C Voltage Accuracy: +/-0.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual Supported Sampling Interval 1-60mins Mesh Antenna Omni-directional (20cm in length) or Customised Antenna Connector Non-SMA (M) Antenna Description * E.g., the radio link from a gateway to the 1st layer node is called the 1st hop. 4. Gateway Terminologies Figure 3. Gateway Internal Terminologies. 5. Operation Procedures 5.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual Once the location is chosen, you are ready to deploy your WiSenMeshWAN® system. 5.2．Deployment Procedures 1) Antenna Installation: screw the antennas firmly onto the Mini Gateway; 2) Power on: Connect the USB cable between Mini Gateway and PC; Figure 4. USB Connections. LED flashing sequence: You should see three Mesh LEDs flashing 3 times, then green LED on for 1s, then a quick flash on the 3 LEDs, then Off.
Wisen Innovation Technical Doc. No.2021 A. WiSenMeshWAN® Mini Smart Gateway - User Manual Remote Inspection of historical data, to identify: a) Whether the heart-beat message has been sent back successfully at each time interval; b) Whether the voltage in the heart-beat message is as expected, if not, please check the USB power supply; c) Whether the signal strength has become significantly weaker, if yes, please check the antenna has been screwed on firmly; B.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual 8. Safety and Warning Warning: Please read the following instructions carefully. 1）Operation Safety Before taking any action, please read all the information provided carefully, and keep the guidance documents safe; Ensure that any procedure and installation are correctly carried out. This product has been designed to a certain water-proof level.
Wisen Innovation Technical Doc. No.2021 WiSenMeshWAN® Mini Smart Gateway - User Manual FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
