USER MANUAL 8201 Eastpoint Dr. #500 . Dallas, TX 75227 www.wiselift.com © 2019 Letronics Inc.
SAFETY AND PRECAUTIONS Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature before attempting to operate this product for the first time. If there is any information in this manual which you do not understand, or if you require additional assistance for setup or operation, please Contact a WiseLift representative at 1-877-7822010.
WHAT’S IN THE BOX Please check that all the following items are accounted for.
YOUR WISELIFT TABLE This section describes the features of your table. Carefully review the function and location of each item described. Your WiseLift table USB port operates on standard household current and can be plugged into any standard 110-volt wall outlet. Use a surge protector with this table. TABLE PLACEMENT Your lift table should be placed near a standard electrical outlet on dry, level ground where there is ample room to allow for proper operation.
ASSEMBLY NOTE: Complete visual walk-through of table assembly is available at https://www.youtube.com/watch?v=NY_qzg-u_rw&t=6s NOTE: If you discover a problem at any point during the setup and positioning of your lift table, stop and contact a WiseLift representative at 1-877-782-2010. To avoid personal injury and/ or product damage, do not plug the unit into the electrical outlet until the problem is corrected and do not attempt to fix electrical problems by yourself.
Figure 1.2 4. Line up table top and attach using the provided screws, and using the allen wrench to tighten the screws down. (fig 1.3) 5. Lift the table upright and confirm that all parts are tight and functioning properly. 6. Move the table to the desired location. 7. Check to see that it’s stable in its final location. If your table is unstable, consider removing the wheels and placing the weight of the furniture on the table base. You may also need to move the base location of the column.
Figure 1.3 OPERATION There are certain precautions that should be taken during the operation of your table. Read and follow these precautions carefully in order to ensure safe table operation and to prevent injury and/or product damage. • Plug the power cord directly into a surge protector, then into the wall outlet. Do not use a standard extension cord! • Periodically check cord for visible damage. • Keep children and pets away from all moving parts while operating the table.
LIFT CHAIR / RECLINER Slides under almost any lift chair or recliner and easily swivels out of the way for full motion of the lift chair. It is recommended to use the base position that is at the front of your chair to allow the base to be out of the way. Do not use the wheels. Figure 2.1 SOFA / LOVE SEAT Perfect for any couch, love seat or sofa with height adjustablilty. Use the base location that is most comfortable when using the table. You can place the leg of the sofa on the base for added stability.
STANDING DESK Maximize your work efficiency and cut back on the sedentary lifestyle of sitting at your desk all day. Only use the center base location when using as a standing desk. You may use the wheels with the standing desk or remove them for added stability. Figure 2.4 PRESS HERE TO LOWER Figure 3.1 ADJUST TABLE HEIGHT The WiseLift Table accommodates sitting in the lowest chair, to laying in the highest pillow top bed, and even standing up.
ADJUST TILT ANGLE The WiseLift Table tray tilts to your custom angle for reading or using a laptop computer. Raised ledges assure your items do not slide off. The table portion with the cup holder and charging ports does not tilt. Pull the plunger as shown in figure 3.2 and adjust to the desired angle. Ensure the plunger is locked in position before using the table top. Figure 3.2 Figure 3.3 SWIVEL 360° When the WiseLift Table base is under a lift chair or sofa, just swivel it and it’s out of the way.
Figure 3.5 For using wheels. CHANGE BASE LOCATION The WiseLift Table base has 3 position options. If you are using the wheels, for rolling the table around, the center position is used for maximum stability. For fixed locations with a sofa or lift chair, the left or right positions accommodate either left or right side configurations. This puts most of the base under the furniture for maximum support and low profile. Simply follow the assembly instruction to re-install the column in a different location.
CLEAN AND CARE • Unplug the table during cleaning • Do not allow liquids to come into contact with electrical components The Table should not be allowed to come in direct contact with any type of heat source (e.g., a space heater or cigarette). Personal injury or fire damage may occur. ELECTRONICS CARE • Inspect all wiring to make sure they are not damaged or frayed. • If damage is present, unplug the lift table and contact your authorized provider for service.
WARRANTY Item: WiseLift Table Rev. 071620 LIMITED WARRANTY WiseLift warrants the original purchaser that its products under normal use, in accordance with operating instructions, will perform to the specifications published by WiseLift at the time of purchase, for the following periods, from the date of purchase by the consumer: 1 YEAR WARRANTY Includes table frame, swivel and tilt mechanisms.
SPECIFICATIONS 8201 Eastpoint Dr. #500 Dallas, TX 75227 www.wiselift.com Ver. 071720 © 2019 Letronics Inc.
