Full Product Manual

WiseLift
7
NOTE: If you discover a problem at any point during the setup and positioning of your lift chair,
stop and contact a WiseLift representative at 1-877-782-2010. To avoid personal injury and/
or product damage, do not plug the unit into the electrical outlet until the problem is corrected
and do not attempt to fix electrical problems by yourself.
Your lift chair will require some assembly before initial use. It may also require disassembly to
make servicing the chair more convenient.
The WiseLift Chair will be shipped to you in 2 pieces, the chair seat (Chair base) and the chair
back. The chair base will also have the remote control and power supply connected to it. To
assemble the WiseLift Chair, follow these instructions:
1. Locate the mounting brackets on the back of the chair base.
2. Positions the base so the fasteners on either side of the chair back line up over
the mounting brackets on the back of the chair seat. (Figure 1.1)
3. Slide the chair back onto the brackets. Next, firmly push the back onto the brackets, you
may hear a *click* sound as the metal tabs lock into place.
4. Ensure that the chair back is locked into place and securely attached to the chair base.
5. Connect the chair base and the chair back cable, indicated by the red markers
(Figure 1.2a and 1.2b). These control the main power to the chair back, massage
capability and heating feature .
ASSEMBLY
Figure 1.1