Full Product Manual

WiseLift
16
• Ensure the hand control is connected properly to the lift chair. If connected properly,
the LCD on the remote will be lit.
• If the LCD display does not turn on, contact a WiseLift representative at
1-877-782-2010.
What if my lift chair is unstable after I position the chair?
• The floor may be uneven or the carpet may be affecting chair position. Adjust the
leg levelers in the area where the chair is rocking. See section “Your Lift Chair” for
instructions on leveling your chair.
Where can I place the external power box?
• On the floor away from heat sources in an open, well-ventilated area where it will not be
an obstruction.
• On the wall away from heat sources utilizing the optional external transformer wall
mount.
How do I turn Voice Command on/off?
• Hold down the “Vibration Intensity” button down for 10 seconds. The LCD screen will
flash and this will turn voice command on / off.
How do I manually reset the chair?
• Unplug the chair from the wall, wait 10 seconds then plug back in. Press and hold the
“Massage Zone” button for 5 seconds. The chair will now perform a manual reset. The
chair will move during this operation. The LCD display will stop blinking and the chair will
stop moving to indicate that the reset is complete. DO NOT SIT IN THE CHAIR while it
resets. You can also check our “Reset Video” that can be found on the WiseLift YouTube
page.
How do I just use the massage feature with no heat?
• Once you press the red on/off button this turns both heat and massage on. To turn the
heat off simply press the “heat” button one time. This will leave just the massage feature
on.
How do I just use the heat feature with no massage?
• Once you press the red on/off button this turns both heat and massage on. To turn the
massage off simply press the “massage” button one time. This will leave just the heat
feature on.
Please find us on YouTube to learn more about your chair and how to operate it.