Full Product Manual

WiseLift
12
MASSAGE AND HEAT FEATURES
The massage zone button (green circle in Figure 2.4) will
cycle through the 4 massage zones. You will see which
massage zones are on the remote LCD display. The heat
button (Orange circle in figure 2.4) will cycle through the 2
heat zones on the chair, chair back heat, seat heat, both
on, or off.
Note: The heat function will automatically turn off after
10 min in “Auto” mode. Be aware that the average temperature of the heating pad ranges
between 106°F – 118°F (41°C – 48°C) and can be affected by the ambient temperature of
the room and clothing worn by the user. It is recommended that the heat units not be used
for more than 30 minutes at a time as prolonged exposure may have an adverse effect on
sensitive skin. However, you should consult your physician about how often you should use
the heat and massage options on your lift chair.
remote. This button is primarly designed as a safety feature to ensure that the chair does not
over heat. The power button will turn off the heat and massage functions.
CUSTOMIZE THE PRESET POSITIONS
The Wiselift chair has 4 preset positions that can be customized to your personal preference:
Trendelenburg, sleep, zero gravity and TV. For demonstration purposes we will use the “TV
Position”. Before you begin, heat and massage need to be off.
1. Press the Red On/Off button to turn off these features.
VIBRATION INTENSITY AND TIMER
The vibration intensity button (blue circle in figure 2.4)
will toggle through 3 intensities: Low, Medium and High
as indicated on the remote LCD display.
The timer button (purple circle in figure 2.4)
will toggle through the preset timer options as follows:
10 minutes, 20 minutes and 30 minutes and “Auto”
Mode. Once the time has expired, both the heat and
massage features will be turned off if activated. The
chair power will remain on and the chair will not change
positions.
ON/OFF BUTTON
The red On/Off Button is located in the center of the
Figure 2.4
Figure 2.5