Full Product Manual

WiseLift
11
LIFT BUTTON
This feature assists the user in sitting down from a standing position or stand up from any
seated position.
From any position press and hold the “Lift” button (green circle in Figure 2.2). If the chair is
reclined in any position, it will first return to the “Sit” position and then proceed to lift.
Once in the lifted position, you can press and hold the “Sit” button (orange circle in Figure
2.2) to return to the floor. You can also press and hold any of the other settings from the lifted
position, however you will automatically be taken to the “Sit” position first and then the chair
will begin to recline to the selected position.
Note: When the chair is lifted, the back rest buttons and the foot rest buttons (Figure 2.3) are
deactivated for safety reasons. They will be re-activated when the chair fully returns to the “Sit”
position.
FOOT-REST/CHAIR-BACK CONTROL
These buttons allow the user to adjust the exact position of the back rest (green circle in
Figure 2.3) or the foot rest (orange circle in Figure 2.3) from any pre-programmed position.
This results in an infinite amount of possible positions.
As a safety feature, these buttons become deactivated while the chair is in the lifted position.
After the chair is returned to the “Sit” position, these buttons become re-activated.
Figure 2.3
Figure 2.2