User Manual

1、With the router powered on, connect LAN port of the router to the PC by a network cable (or

using a laptop to connect the WIFI signal transmitted by the router). Then wait for the WIFI

showing connected. Every WIFI name is different varying from the different router. (eg: This wifi

name is set up by ourselves.)

2. Open the browser and input 192.168.0.1 Then come the following page. And input the

“Password ” admin”.

3. We can check the running router version in Internet Status after you enter in the

administration page.

PAGE 1
、With the router powered on, connect LAN port of the router to the PC by a network cable (or using a laptop to connect the WIFI signal transmitted by the router). Then wait for the WIFI showing connected. Every WIFI name is different varying from the different router. (eg: This wifi name is set up by ourselves.) 2. Open the browser and input 192.168.0.1 Then come the following page. And input the “Password ” admin”. 3.
PAGE 2
4. Download the “WT-RT8501 upgrade firmware”profile in our official website. This is the link. http://www.wise-tiger.com/English/html/708342546.html 5. Click the “Administration” button, as the following page, add the downloaded profile to upgrade. 6. This box shows that it has been upgrading now.
PAGE 3
7. When this box shows 100%, that means the software has been upgraded successfully. Then wait the router to restart automatically. If not, please press the “reset” button back the router. 8. This is the upgraded version.