User manual

User Manual
6
Installing the Software
Insert the CD-ROM into your drive. Do not connect your camera at this point yet.
You will be asked to do so later. The installation program should auto-run.
If the program does not auto-run then you need to run the setup.exe from the
CD-ROM. To do this, go to “My Computer” and right-click on the CD Drive and
choose “Open” or“Explore”: this will show you the contents of the CD-ROM where
you can double click the“autorun” icon in order to run it.
ٛ
Install the driver
ٛ
Install the MiniSee suite software (Free software)
ٛ
Install the ScopePhoto suite software
ٛ
Install DirectX 9.0
To Connect Camera
Insert the plug of camera’s USB cable into the USB port of your PC.
ٛ
“New Hardware Found” displays at the bottom right of your PC screen. The
camera is recognized.
ٛ
“Windows Logo Testing” window displays, to click “continue anyway” to continue.
ٛ
Restart system
ٛ
The driver is now installed and your PC will be able to recognize the camera
whenever you connect it to the PC.
NOTE:
The installation in Windows XP would possibly meet some exception. Your system
may not be able to recognize the camera. To overcome this problem, it is
recommended that you go to my computer->property-> hardware-> device
management to upgrade the driver of the PC camera. The system can automatically
search the driver and reinstall it. However, this will be time consuming. A better way
is to specify the location for the driver, than follow the instructions of the system.
You have to restart the computer to finish the installation.
Using the camera
ٛ
Press to start
ٛ
Press “Alt+D” to select camera
Image is currently being displayed, the toolbar will become following:
ٛ
Press to capture image
More about using the software please see ”HELP” of the software.