User Manual

Industrial Motherboards & Systems
Features
 Supports Intel Pentium, Celeron, Atom, Quad Core & Dual Core processor
 Two 260-pin SO-DIMM up to 32 GB DDR4 3200 MHz SDRAM
 Supports DP
++
1.2/HDMI 1.4b/eDP (optional)/LVDS(optional)
 Supports 1 PCIE x1 or 2 M.2 (B+E key), 6 COMs(4 COM optional),
3 USB 3.2 Gen2, and 5 USB 2.0
 Lower total cost of ownership with DC12V support and onboard TPM2.0
(optional)
 Supports Device-On and Embedded Software APIs
AIMB-218
Intel Pentium , Celeron & Atom
Mini-ITX with HDMI/DP/eDP or LVDS,
6 COM, and Dual LAN
Specifications
Processor System
CPU (10nm) J6413 J6412 J6426 N6211 N6210 x6413E
Core Number 4 4 4 2 2 4
Base Frequency 1.8GHz 2.0GHz 2.0GHz 1.2GHz 1.2GHz 1.5GHz
BIOS AMI 256 Mbit SPI
Expansion Slot
M.2
E key for wireless module (Type: 2230)
B key for storage and LTE module, only support PCIex1 signal (Type: 2242/2280)
PCIe PCI Express x1
Memory
Technology Dual channel DDR4 3200 MHz SDRAM
Max. Capacity 32 GB/32 GB per SO-DIMM
Socket 2 x 260-pin SO-DIMM (Non-ECC)
Graphics
Controller Intel Gen 11 Graphics Engines
LVDS/eDP 1 (Sku option) / 1 (BOM option)
HDMI 1 HDMI 1.4b
DP++ 1 DP 1.2
Triple display DP + HDMI, DP + HDMI + eDP (optional), DP + HDMI + LVDS(optional)
Ethernet
Interface 10/100/1000 Mbps
Controller
GbE LAN1: Realtek 8111H
GbE LAN2: Realtek 8111H
Connector Max. RJ-45 x 2
SATA
Max Data Transfer Rate 600 MB/s
Channel 1
Rear I/O
DP 1.2 1
HDMI 1.4b 1
Ethernet 2
USB 4 (3USB 3.2 Gen2 + 1USB2)
Audio 1 (supports Line-out by default, converts to Mic in or Line in)
DC jack 1 (2.5 mm)
Internal Connector
LVDS & Inverter 1 (optional)
eDP 1 (optional)
USB 4 USB2.0
Serial
6 (COM1 support 5V/12V selection; COM2 support RS-232/422/485, set by Jumper; COM3~COM6 support RS-232
(COM3~6 BOM option))
SATA 1
SATA PWR Connector 1
M.2 2 (B key for storage and LTE module, E key for wireless module support)
GPIO 8-bit
PS/2 KB & MS 1
Watchdog Timer
Output System reset
Interval Programmable 1 ~ 255 sec/min
Power
Power Type Single voltage 12V DC input; 1 x External DC jack; 1 x Internal 4-pin (2x2) power connector; Supports AT/ATX mode
Typical Power Consumption TBD
Environment
Operating Non-Operating
Temperature
0 ~ 60 °C (32 ~ 140 °F) with 0.7m/s air flow (for D/J/L
SKU)
-20 ~ 70 °C (-4 ~ 158 °F) with 0.7m/s air flow (for Z SKU)
-40 ~ 85 °C (-40 ~ 185 °F)
Physical Characteristics Dimensions 170 x 170 mm (6.69" x 6.69")
Utilities:
Software APIs:
RoHS
COMPLIANT
2002/95/EC
All product specifications are subject to change without notice. Last updated: 9-Jun-2021