User manual

TS/IP IP input/output port
RS-232 serial port for printing information
ASI OUT1 Group1 ASI output port (one for back-up)
ASI1 IN ASI1 input port
SDI1 SDI1 output port
CVBS CVBS BNC output port
YPbPr YPbPr output port
L-Audio-R1 Group1 RCA audio output port
Audio1 AES/EBU and Balance Audio output port1 (need to
use the RS232-to-XRL converting cable in
accessories)
TUNER OUT Tuner signal loop through output port
TUNER IN Tuner signal input
Switch Power switch
MANAGEMENT LAN port for software update
ASI OUT2 Group2 ASI output port (one for back-up)
ASI2 IN ASI2 input port
SDI2 SDI2 output port
HDMI HDMI output port
CVBS CVBS RCA output port
L-Audio-R2 Group2 RCA audio output port
AUDIO2 AES/EBU and Balance Audio output port2 (need to
use the RS232-to-XRL converting cable in
accessories)
GND Grounding terminal
Power Socket AC 90~250V 50-60Hz input
3.5 Power On the Device
Be sure the device is mounted into the rack properly and firmly, and the signal cables
TS/IP RS-232 ASI Out1 ASI1 In SDI1 CVBS YPbPr L-Audio-R1 Audio1 Tuner out Tuner in Switch
Management ASI Out2 ASI2 In SDI2 HDMI CVBS L-Audio-R2 Audio2 GND Power Socket