User manual

input.
6-xxxxx displays the program name, which comes from MUX TS.
All encrypted programs are labeled with a „$‟ sign on the first row. Press
<ENTER>-key to the program just be selected to be delivered to the specified
IPTV channel or to scrap by pressing <EXIT>-key.
5.3 System Menu
There are seven sub-menus:
System
Local
Setup
Trap IP
Unit
Name
Properties
Factory
Settings
LCD
Switch
Machine
Type
Optional
Function
HTTP
Login
5.3.1 Local Setup
Each 6PSDSC-IP-5000Phas an IP address, a network sub mask and a gateway. These
must be set to an appropriate value for the network over which the unit can be accessed by
the remote control system such as the HDMS.
IP Address: The IP address for the unit.
Network Mask: The network mask for the subnet to which the unit is connected.
Gateway: The gateway for the network to which this unit is connected.
5.3.2 Trap IP Addr
The 6PSDSC-IP-5000Pprovides a Monitor Center IP address. You can set this to be the
same IP address of the Monitor Center, which is typically a PC in order to allow the device to
send messages to the monitor center.
5.3.3 Unit Name
The 6PSDSC-IP-5000Pallows you to edit the unit name which is displayed on the front
panel LCD. Default name is „Digital TV Processor”. The unit name should not be longer than
20 characters in ASCII format.
5.3.4 Properties
Version: show software version of this device
MAC Address: Factory-set MAC address which is guaranteed to be unique. You cannot