User manual

(1) Input Setup Set input parameters
(2) Output Setup Set output parameters
(3) System Set system parameters
(4) Ethernet(optional) Set Ethernet parameters
Note: Ethernet under Main Menu only appears if the unit is a Gigabit model.
5.1 Inputs Menu
There are four options: Status, DVB-S2, RSSI and Ethernet (optional):
Note: Ethernet under Inputs Menu only appears if the unit is a Megabit model.
5.1.1 Status Menu
It contains four options, ASI1, ASI2, TUNER and IP IN, to show the status of signal
input:
ASI1: When signal from ASI1 input port is locked, it will display package format and
code rate; if signal is not locked, it will show Unlock.
ASI2: When signal from ASI2 input port is locked, it will display package format and
code rate; if signal is not locked, it will show Unlock.
TUNER: When signal from tuner input port is locked, it will display package format and
code rate; if signal is not locked, it will show Unlock.
IP IN: When signal from IP input port is locked, it will display package format and code
rate; if signal is not locked, it will show Unlock.(Note: this option only appears when set the
External Function as “IP IN”. Please refer to section 5.3.6 for setting method)
5.1.2 DVB-S2 Menu
There are 6 options to set DVB-S2 parameters. After signal is locked, the TUNER
Inputs
Status
DVB-S2
Ethernet
RSSI